manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 110 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 110

Operating Environment

Using JVC CAM Control

Use Android smartphone or tablet to control the camera.
The application for Android tablet allows you to switch between and control up to four cameras on a 
single tablet.

The following environment is required to run the applications for Android smartphone or tablet:
　・For Android smartphone
　     Android 2.3 or higher
　・For Android tablet
　    Android 2.3 or higher
　　 Display size: 7 inches or more, 　Resolution: 1024 x 600 or more
Able to connect to the internet and "Google Play" (required for software installation)

Installing JVC CAM Control

１．Tap "Play Store" on the application list
２．Search for the “JVC CAM Control” application.
３．For Android smartphone： Tap "JVC CAM Control Single"
　　For Android tablet： Tap "JVC CAM Control Multi"
　　・The detailed information of the application is displayed.
４．Tap "Download"
　　For applications that access data or functions of this unit, a screen that shows the data or 

      functions that will be used is displayed.
５．Confirm the content and tap "Agree and Download"
　　・Downloading starts.

Deleting the Application

１． Tap "Play Store" on the application list
２． Press the menu button and tap "My apps".
　　・A list of previously downloaded applications is displayed.
３．Application for Smartphone：  Tap "JVC CAM Control Single"
　　Application for Tablet device： Tap "JVC CAM Control Multi"
４．Tap "Uninstall", then tap "OK"

　　The specifications of Google play  are subject to changes without prior notice.
　　For operating details, refer to the help file of Android Market  .

NOTE

2

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments