manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 39 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 39

39

Use

Streaming images

Installing the supplied camera driver allows you to use 
this unit as a web camera. Use the distribution software 
or website for the web camera such as Ustream 
Producer (http://www.ustream.tv/producer) to stream 
the images.
The camera driver and "JVC CAM Control" are installed 
simultaneously.

Using "JVC CAM Control"

The supplied "JVC CAM Control" allows you to control multiple cameras.
Required operating environment
Operating System: Windows

®

 7 Home Premium (32-bit/64-bit, Pre-install, with SP1)

CPU: Intel

® 

Core

TM

 2 Duo 2 GHz or higher (Intel

® 

Core

TM

 2 Quad 2.66 GHz or higher when using MPEG-2 TS(HD))

RAM: 2 GB or more

Installing "JVC CAM Control"

1 

Insert the supplied software CD-ROM into the 
CD/DVD drive of your computer.

2 

Click "setup (setup.exe)" on the auto play 
window.
•  If the auto play window does not appear, double-

click the "setup (setup.exe)" icon in the software 
CD-ROM.

•  Follow the on-screen instructions to finish the 

installation.

•  If the user account control window appears, click 

"Yes".

•  2 icons will appear on your desktop when the 

installation is finished.

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments