manualshive.com logo in svg

JVC GV-LS2, User Manual, Page: 22 / 172

Share
Download
JVC GV-LS2 User Manual Download Page 22

22

Preparation

4 

Enter "PASSWORD".

5 

Click the "SAVE" button.

The settings to be configured on a browser have 
been complete. Close the browser, and shutdown 
the computer.

6 

Press and hold the power button to power off.

7 

Disconnect the LAN cable that connects the 
camera to your computer.

8 

Set the network mode switch to "WLAN".

9 

Press and hold the power button to power on.
When the "WPS" button stops blinking and stays lit, 
the connection is complete.

Connecting manually

1 

Select "WIRELESS NETWORK" in "NETWORK".

If the sub settings are not displayed, click "+" on the 
left of "NETWORK".

2 

Click the "MANUAL" button.

3 

Enter the information, and click the "SAVE" 
button.

The settings to be configured on a browser have 
been complete. Close the browser, and shutdown 
the computer.

4 

Press and hold the power button to power off, 
and disconnect the LAN cable that connects the 
camera to your computer.

5 

Set the network mode switch to "WLAN".

6 

Press and hold the power button to power on.
When the "WPS" button stops blinking and stays lit, 
the connection is complete.

Summary of Contents for GV-LS2













































































































































































Reviews:

No comments