Juniper NFX150, Hardware Manual

Page: 64 / 152

Installing and Connecting an NFX150 Device
To install and connect an NFX150 device:
1.
Follow instructions in “Unpacking an NFX150 Device” on page 61 .
2.
Mount the device by following instructions appropriate for your site:
• “Mounting an NFX150 Device on a Desk or Other Level Surface” on page 65 (using
the rubber feet provided)
•
“Mounting an NFX150 Device on Two Posts in a Rack” on page 71 (using the
mounting brackets provided)
• Mounting an NFX150 Device on Four Posts in a Rack or Cabinet (using the separately
orderable four-post rack-mount kit)
•
“Mounting an NFX150 Device on a Wall” on page 67 (using the separately orderable
wall-mount kit)
3.
Follow instructions in “Connecting Earth Ground to an NFX150 Device” on page 73 .
4.
Follow instructions in “Connecting AC Power to an NFX150 Device” on page 75 .
5.
Perform initial configuration of the device by following instructions in Configuring an
NFX150 Device .
6.
Set the device’s management options by following the appropriate instructions:
• Connecting an NFX150 Device to a Management Console on page 78
•
Connecting an NFX150 Device to a Network for Out-of-Band Management on
page 77
See Also Rack Requirements for NFX150 Devices on page 48
•
•
Cabinet Requirements for an NFX150 Device on page 49
•
Clearance Requirements for Airflow and Hardware Maintenance for an NFX150 Device
on page 45
Mounting an NFX150 Device
Table 33 on page 65 lists the methods you can use to mount an NFX150 device.
Copyright © 2018, Juniper Networks, Inc. 64
NFX150 Network Services Platform Hardware Guide