Juniper NFX150, Hardware Manual

Page: 85 / 152

NOTE: Alternately, you can use the USB cable to connect to the mini-USB
console port on the device. To use the mini-USB console port, you must
download the USB driver from the following page and install it on the
management device:
https://www.juniper.net/support/downloads/junos.html
3.
Use any terminal emulation program, such as HyperTerminal, to connect to the device
console. The CLI displays a login prompt.
4.
Log in as root and enter the password juniper123 . If the software completes booting
before you connect to the console, you might need to press the Enter key for the
prompt to appear:
login: root
password:
juniper123
5.
Start the CLI:
root@:~ # cli
root@>
6.
Enter configuration mode:
root@> configure
[edit]
root@#
7.
Change the password for the root administration user account:
[edit]
root@#
set system root-authentication plain-text-password
New password:
password
Retype new password: password
8.
Enable SSH service for the root user:
[edit]
root@#
set system services ssh root-login allow
9.
(Optional) Enable the Internet connection for devices connected on LAN by setting
the DNS IP:
[edit]
root@#
set access address-assignment pool junosDHCPPool family inet dhcp-attributes
name-server dns-server-ip
10.
Commit the configuration:
[edit]
root@#
commit
85 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration