Juniper NFX150, Hardware Manual

Page: 34 / 152

Figure 14: Chassis Status LEDs in an NFX150-S1 Device
1
g100004
2— 1— Slot
Chassis status LEDs (
ALM
,
SYS
,
MST
, and
PH )
Table 12 on page 34 describes the chassis status LEDs in an NFX150 device, their colors
and states, and the status they indicate. You can view the colors of the four LEDs remotely
through the CLI by issuing the operational mode command
show chassis led
.
Table 12: Chassis Status LEDs in an NFX150 Device
State and Description Color LED Label
There is no alarm or the device is halted. Unlit ALM (Alarm)
There is a major alarm. Red
There is a minor alarm. Amber
• On steadily—Junos OS has been loaded on the device.
•
Blinking—The device is booting.
• Off—The device is powered off or is halted.
Green SYS (System)
• On steadily—The device is functioning normally.
•
Off—The device is powered off or is halted.
Green MST (Master)
There is no Network Service Activator transaction. Unlit PH
• On steadily—Network Service Activator transaction is
successfully completed. That is, the Network Service
Orchestrator in NFX150 contacted the Network Service
Activator and provisioned the software image successfully.
•
Blinking—Network Service Activator transaction is underway.
• Off—The device is powered off or is halted.
Green
• On steadily—Network Service Activator transaction is
terminated unsuccessfully.
• Blinking—Network Service Activator transaction is waiting
for user input.
Amber
A major alarm (red) indicates a critical error condition that requires immediate action.
Copyright © 2018, Juniper Networks, Inc. 34
NFX150 Network Services Platform Hardware Guide