![Juniper NFX150 Hardware Manual Download Page 140](http://html1.mh-extra.com/html/juniper/nfx150/nfx150_hardware-manual_2032522140.webp)
Related
Documentation
General Safety Guidelines and Warnings on page 117
•
•
General Electrical Safety Guidelines and Warnings on page 140
•
AC Power Electrical Safety Guidelines on page 143
•
PTX5000 AC Power Electrical Safety Guidelines
•
PTX5000 AC Power Electrical Safety Warnings
•
DC Power Electrical Safety Guidelines
•
PTX1000 DC Power Electrical Safety Guidelines
•
PTX3000 DC Power Electrical Safety Guidelines
•
PTX5000 DC Power Electrical Safety Guidelines
•
Laser and LED Safety Guidelines and Warnings
•
Laser and LED Safety Guidelines and Warnings for the ACX5000 Router
•
Installation Instructions Warning on page 123
•
Grounded Equipment Warning
General Electrical Safety Guidelines and Warnings
WARNING:
Certain ports on the device are designed for use as intrabuilding
(within-the-building) interfaces only (Type 2 or Type 4 ports as described in
GR-1089-CORE) and require isolation from the exposed outside plant (OSP)
cabling. To comply with NEBS requirements and protect against lightning
surges and commercial power disturbances, the intrabuilding ports must not
be metallically connected to interfaces that connect to the OSP or its wiring.
The intrabuilding ports on the device are suitable for connection to
intrabuilding or unexposed wiring or cabling only. The addition of primary
protectors is not sufficient protection for connecting these interfaces
metallically to OSP wiring.
CAUTION:
Before removing or installing components of a device, connect
an electrostatic discharge (ESD) grounding strap to an ESD point and wrap
and fasten the other end of the strap around your bare wrist. Failure to use
an ESD grounding strap could result in damage to the device.
•
Install the device in compliance with the following local, national, and international
electrical codes:
•
United States—National Fire Protection Association (NFPA 70), United States
National Electrical Code.
•
Other countries—International Electromechanical Commission (IEC) 60364, Part 1
through Part 7.
Copyright © 2018, Juniper Networks, Inc.
140
NFX150 Network Services Platform Hardware Guide
Summary of Contents for NFX150
