Juniper NFX150, Hardware Manual

Page: 77 / 152

Connecting the NFX150 to the Network
•
Connecting an NFX150 Device to a Network for Out-of-Band Management on page 77
•
Connecting an NFX150 Device to a Management Console on page 78
• Connecting an NFX150 Device to a Management Console Using Mini-USB Type-B
Console Port on page 79
•
Installing a Transceiver in an NFX150 Device on page 80
•
Connecting a Fiber-Optic Cable to an NFX150 Device on page 82
Connecting an NFX150 Device to a Network for Out-of-Band Management
You can monitor and manage the NFX150 device using a dedicated management channel.
NFX150 devices have one management port, eight 1-Gigabit Ethernet RJ-45 ports, two
1-Gigabit Ethernet RJ-45 network/uplink ports, two 1-Gigabit Ethernet small form-factor
pluggable (SFP) ports, and two 1/10-Gigabit Ethernet SFP+ ports. Use the management
port to connect the NFX150 device to a network for out-of-band management.
Ensure that you have an appropriate cable available.
To connect an NFX150 device to a network for out-of-band management (see
Figure 33 on page 77 ):
1.
Connect one end of the cable to the management port (labeled
MGMT
) on the NFX150
device.
2.
Connect the other end of the cable to the management switch (see
Figure 33 on page 77 ).
Figure 33: Connecting an NFX150 Device to a Network for Out-of-Band Management
77 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration