Juniper NFX150, Hardware Manual

Page: 73 / 152

6.
Have one person grasp both sides of the device, lift the device, and position it in the
rack, aligning the mounting bracket holes with the threaded holes in the rack or cabinet
rail. Align the bottom hole in both the mounting brackets with a hole in each rack rail,
making sure the chassis is level. See
Figure 29 on page 73 .
Figure 29: Mounting the Device on Two Posts in a Rack
g10001
4
7.
Have a second person secure the device to the rack by using the appropriate screws.
Tighten the screws.
8.
Ensure that the device chassis is level by verifying that all screws on one side of the
rack are aligned with the screws on the other side.
See Also Connecting AC Power to an NFX150 Device on page 75
•
•
Connecting Earth Ground to an NFX150 Device on page 73
•
Rack-Mounting and Cabinet-Mounting Warnings on page 126
Connecting the NFX150 to Power
• Connecting Earth Ground to an NFX150 Device on page 73
• Connecting AC Power to an NFX150 Device on page 75
Connecting Earth Ground to an NFX150 Device
Earth grounding is recommended, but optional for the NFX150 device. The device functions
normally without earth grounding. Electromagnetic Compatibility (EMC) and Electrostatic
Discharge (ESD) requirements are met by the device chassis. The AC power cord provides
surge protection.
73 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration