Juniper NFX150, Hardware Manual

Page: 75 / 152

Figure 30: Connecting a Grounding Cable to an NFX150-S1 Device
g100006
Figure 31: Connecting a Grounding Cable to an NFX150-C-S1 Device
g10002
9
3.
Secure the grounding lug to the protective earthing terminal with the washers and
screws.
4.
Dress the grounding cable and ensure that it does not touch or block access to other
device components.
WARNING: Ensure that the cable does not drape where people could trip
over it.
See Also Connecting AC Power to an NFX150 Device on page 75
•
Connecting AC Power to an NFX150 Device
The power supply in an NFX150 device is located on the rear panel.
Ensure that you have the following parts and tools available:
•
A power cord appropriate for your geographical location
• A power cord retainer clip
CAUTION: NFX150 device gets additional grounding when you plug the power
supply in the device into a grounded AC power outlet by using the AC power
cord appropriate for your geographical location (see
“AC Power Cord
Specifications for an NFX150 Device” on page 38 ).
75 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration