Juniper NFX150, Hardware Manual

Page: 38 / 152

AC Power Supply Specifications for an NFX150 Device
Table 17 on page 38 describes the AC power specifications for an NFX150 device.
Table 17: AC Power Specifications for an NFX150 Device
Power Supply
Type Maximum Power
Consumption AC Input Current
Rating AC Input Line
Frequency
AC Input Voltage
(Operating
Range)
Product SKU
Internal 150 W 1.8 A at 240 VAC 50–60 Hz nominal 100 through 240
VAC NFX150-S1
Internal 150 W 1.8 A at 240 VAC 50–60 Hz nominal 100 through 240
VAC NFX150-S1E
See Also AC Power Cord Specifications for an NFX150 Device on page 38
•
•
General Safety Guidelines and Warnings on page 117
•
General Electrical Safety Guidelines and Warnings on page 140
AC Power Cord Specifications for an NFX150 Device
A detachable AC power cord is supplied with the AC power supplies. The coupler is type
C13 as described by International Electrotechnical Commission (IEC) standard 60320.
The plug at the male end of the power cord fits into the power source outlet that is
standard for your geographical location.
CAUTION: The AC power cord provided with each power supply is intended
for use with that power supply only and not for any other use.
NOTE: In North America, AC power cords must not exceed 4.5 meters in
length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA
75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3).
The cords supplied with the switch are in compliance.
Table 18 on page 38 gives the AC power cord specifications for the countries and regions
listed in the table.
Table 18: AC Power Cord Specifications
Juniper Model Number Plug Standards Electrical Specifications Country/Region
CBL-EX-PWR-C13-AR IRAM 2073 Type RA/3 250 VAC, 10 A, 50 Hz Argentina
CBL-EX-PWR-C13-AU AS/NZZS 3112 Type SAA/3 250 VAC, 10 A, 50 Hz Australia
Copyright © 2018, Juniper Networks, Inc. 38
NFX150 Network Services Platform Hardware Guide