Juniper NFX150, Hardware Manual

Page: 65 / 152

Table 33: NFX150 Device Mounting Methods
Comments Device Model Mounting Method
On a desk or other level surface by using
rubber feet provided with the device. • NFX150-C-S1
• NFX150-C-S1-AE
• NFX150-C-S1-AA
• NFX150-C-S1E-AE
• NFX150-C-S1E-AA
Desk or other level surface
(using rubber feet)
On two posts in a rack or cabinet by using the
mounting brackets. • NFX150-S1
•
NFX150-S1E
Two-post rack or cabinet
On four posts in a rack or cabinet by using the
mounting brackets. • NFX150-S1
• NFX150-S1E
Four-post rack or cabinet
On a wall by using wall mounting brackets. • NFX150-S1
• NFX150-S1E
• NFX150-C-S1
• NFX150-C-S1-AE
• NFX150-C-S1-AA
• NFX150-C-S1E-AE
• NFX150-C-S1E-AA
Wall mounting
The holes in the mounting brackets are placed at 1 U (1.75 in. or 4.45 cm) apart so that
the device can be mounted in any rack or cabinet that provides holes spaced at that
distance.
See the Related Documentation for detailed descriptions of the various rack or cabinet
mounting options.
See Also Mounting an NFX150 Device on a Desk or Other Level Surface on page 65
•
•
Mounting an NFX150 Device on Two Posts in a Rack on page 71
•
Mounting an NFX150 Device on Four Posts in a Rack or Cabinet
•
Mounting an NFX150 Device on a Wall on page 67
•
Connecting Earth Ground to an NFX150 Device on page 73
Mounting an NFX150 Device on a Desk or Other Level Surface
You can mount an NFX150-C-S1 device on a desk or other level surface by using the four
rubber feet that are shipped with the device. The rubber feet stabilize the chassis.
Before mounting the device on a desk or other level surface:
65 Copyright © 2018, Juniper Networks, Inc.
Chapter 3: Initial Installation and Configuration