Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 83 / 100

1.
Select System Administration > Maintenance > Update Recovery Partition .
If the new recovery partition files have already been prepared, then the Upgrade screen
appears. Proceed with the upgrade phase as described in step 5.
If the upgrade files have not yet been prepared, the Upgrade Preparation window
appears. Proceed with the preparation phase in step 2.
2.
Enter the location of the NSM appliance Regional server or Central Manager upgrade
zip file, downloaded from the Juniper Customer Support Center when upgrading NSM,
on the local file system.
3.
If the NSM appliance Offline server upgrade file is available on the local file system,
enter its location and name of the file in the System upgrade source field. If the NSM
appliance offline server upgrade file is not available on the local file system and the
appliance has access to the Juniper Update site, select
Online .
4.
Click Prepare System .
The Preparation Progress screen shows the progress of the operation.
Errors are reported if the required files are unavailable, disk space is not sufficient, or
the previous version files are invalid.
When preparation is completed, the Upgrade window appears.
5.
In the Upgrade window, enter the admin Web UI password and then click Start Update .
The upgrade process usually takes less than one minute.
CAUTION: Do not interrupt the upgrade process. If you do, your NSM
appliance might not boot normally.
Troubleshooting
Use the options in the Troubleshooting section to access the following information and
utilities:
• Auditing User Operations on page 63
• Error Logs on page 65
•
Network Utilities on page 66
•
Tech Support on page 68
Auditing User Operations
You can audit all user operations performed in an NSM appliance. Users with System
Administrator and NSM administrator permissions can view all Actions Logs in the NSM
appliance.
To view Action Audit Logs:
1.
Select Troubleshooting > Action Audit Logs . The NSMXpress Actions Log dialog box
appears. See Figure 43 on page 64.
63 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Configuring NSM from the Web Interface