Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 58 / 100

5.
Use the
Remote Replication Timeout
option to set up a timeout for Rsync. The valid
range (in seconds) is 1-65535. The default is 1800 seconds.
6.
Click Submit to save the options and return to the main menu or continue with the
other advanced installation options.
Enabling and Configuring SRS (Regional Server Only)
(This option is not available on a central manager.) To configure statistical report server
(SRS) settings:
1.
On the Advanced Options menu, click Menu next to SRS (see Figure 6 on page 34)
to open the SRS menu (see Figure 14 on page 38).
Figure 14: SRS Menu
2.
Use the
SRS
options to turn SRS on ( y ) or off ( n ). The default is off. If you turn on this
feature, the server is used with the GUI Server.
3.
Use the
SRS DB IP
option to enter the IP address for the server on which you have
installed the SRS database server.
4.
Use the SRS DB Type option to select the database type. The values are pgsql (the
default), oracle, or mssql.
5.
Use the
SRS Database Name
option to enter the name of the SRS database. The
default value is netscreen. To enter another name, click the radio button next to the
blank text box and enter the name in the text box.
6.
Use the SRS DB Owner Name option to enter the owner’s name of the SRS database.
The default value is netscreen. To enter another name, click the radio button next to
the blank text box and enter the name in the text box.
Copyright © 2010, Juniper Networks, Inc. 38
NSMXpress and NSM3000 User Guide