Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 29 / 100

•
1 stop bit
•
No flow control
2.
Connect the terminal or laptop to the null modem serial cable plugged into the NSM
appliance console port.
3.
Turn on the NSM appliance.
When the NSM appliance is powered on, the serial console displays diagnostic
information before proceeding to the boot countdown. When complete, the serial
console displays the login prompt terminal emulator.
NSMXpress.juniper.net login:
4.
Enter admin as your default login name.
5.
Enter abc123 as your default password.
6.
Change your default password when prompted. Enter the default password first,
followed by your new password. All passwords are case-sensitive.
Set Up Your Appliance
This section provides the minimum information necessary to make your appliance active
on the network.
To set up your appliance either as a regional server or a central manager, follow these
steps:
1.
Enter the IP address for interface eth0 and press Enter.
2.
Enter the subnet mask for interface eth0 and press Enter.
3.
Enter the default route or default gateway address for interface eth0 and press Enter.
Applying changes...
Re-loading database
ip_tables: (C) 2000–2002 Netfilter core team
ip_tables: (C) 2000–2002 Netfilter core team
ip_tables: (C) 2000–2002 Netfileter core team
Done!
Your NSMXpress is now active on the network.
To configure your system via a web browser, connect to:
https://10.150.43.205/administration
To configure your system via command line, type:
nsm_setup
For operation of NSM server, switch to user “nsm”.
Please consult NSM product documentation for details.
[admin@NSMXpress ~]$
9 Copyright © 2010, Juniper Networks, Inc.
Chapter 1: Getting Started