Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 41 / 100

6> SRS DB Owner Password []
Database password
You have the following options:
•
SRS—Enter 1 to turn the statistical report server on or off. At the next prompt, enter y
to turn it on or n to turn it off. If you turn it on, the SRS will be used with the GUI Server.
• SRS DB IP—Enter 2 to specify the IP address for the server on which you have installed
the SRS database server.
•
SRS DB Type—Enter 3 to specify the database type. The options are pgsql (default),
oracle, and mssql.
• SRS Database Name—Enter 4 to specify the name of the SRS database on the SRS
server. The default value for this option is netscreen.
•
SRS DB Owner Name—Enter 5 to specify the name of the SRS database owner. The
default value for this option is netscreen.
• SRS DB Owner Password—Enter 6 to specify the owner password for the SRS database.
At least eight characters are required. The password is case-sensitive.
Click Submit to save the options and return to the NSM Configuration Main Menu.
Configuring the Central Manager
For details about using the general setup menu items, see “Navigating the Menus” on
page 13.
This section describes the options that are available for a central manager configuration.
The central manager main menu options are:
NSM Configuration Main Menu
1> Management IP [10.150.43.205]
The IP address on this server that will be
used for management
2> NSM 'super' password []
Password for 'super' user
3> GUI server one-time password []
Password for authentication between
HA peers and to all Regional Servers
4> Menu: High Availability [Off]
5> Menu: Advanced Options
A> Apply settings
C> Cancel all changes and quit
R> Redraw menu
Choice [1-5,A,C,R]:
You have the following options:
21 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Installing and Configuring NSM from the CLI