Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 49 / 100

•
3 to check for and install the latest available NSM appliance version.
•
4 to set the proxy for security update check.
3.
Follow the prompts to manage security updates, and then return to the NSM appliance
Settings menu.
Saving Setup Options
Before you configure the regional server or the central manager, the NSM appliance opens
the Apply Change submenu. If you quit out of a menu after making changes, The NSM
appliance also opens this screen and prompts you to save your changes. Updates are
enabled by default.
Select a change to cancel it:
1> IP Change: eth1 is 192.168.1.78 / 255.255.255.0
2> Add route: 192.168.0.0 /255.255.0.0 —> eth1 : [192.168.1.254]
3> DNS add: 192.168.2.2
4> Enable NTP
5> Security updates: automatic check Disabled
A> Apply all changes
B> Make more changes
C> Cancel all changes and quit
R> Redraw menu
Choice [1–5,A,M,C,R]:
You have three options for saving changes:
•
At the prompt, enter one of the following menu options:
•
A to apply all the new changes.
• M to make more changes before configuring the regional server or the central
manager.
• C to cancel all new changes and quit the NSM appliance setup program. After you
cancel a change, the Change Apply submenu reappears.
• Enter the number next to a displayed change to cancel only the selected change.
• Highlight one of the options you modified and delete it.
The NSM Appliance Default Restoration
When you reinstall the NSM appliance, it is completely reimaged. No user data remains
on the system. If you want to preserve your database, back it up before reinstalling.
To reinstall an NSM appliance, use the following procedure. The steps in the procedure
assume the NSM appliance is connected to the computer with a null-modem cable. If
not, refer to the section “Initial Setup Configuration” on page 8 for details.
To reinstall the NSM appliance configuration:
29 Copyright © 2010, Juniper Networks, Inc.
Chapter 2: Installing and Configuring NSM from the CLI