Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 51 / 100

CHAPTER 3
Configuring NSM from the Web Interface
This chapter describes how to configure NSM from the NSM appliance Web interface. It
contains the following sections:
• Configuring the NSM Software on page 31
• Managing NSM Administration on page 39
•
Managing System Administration on page 44
•
Maintaining NSM Appliances on page 61
• Troubleshooting on page 63
• Viewing System Information on page 69
Configuring the NSM Software
After logging in as an “admin” user, an initial setup script walks you through additional
configuration system settings before finalizing the NSM installation. This chapter describes
that setup process.
Your NSM appliance comes preconfigured as a regional server or a central manager.
Most installation and configuration steps in this section are identical for both types of
server. All exceptions are noted.
After logging into the NSM appliance Web interface, you have the following installation
options:
•
Configuring Basic Settings on page 31
• Configuring High Availability on page 34
• Advanced Options on page 36
•
Installing NSM Software on page 39
Configuring Basic Settings
To install the regional server or central manager software using the minimum
requirements:
1.
Complete all appropriate steps in “Getting Started” on page 3.
2.
Enter the https://<ip>/administration URL for your appliance in a Web browser. See
“Web Interface Configuration” on page 11 for details.
31 Copyright © 2010, Juniper Networks, Inc.