Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 74 / 100

2.
View the configured syslog receivers in the table in the top portion of the window.
Table 7 on page 54 describes the fields.
Table 7: Viewing Syslog Receivers
Description Field
A name provided by the network administrator to identify the syslog
receiver Receiver
The IP address of the syslog receiver IP Address
The protocol used for forwarding messages: UDP, TCP, SSL Type
The data sources configured for forwarding Data sources
The system logs configured to be sent to this receiver. System
The Device Server logs configured to be sent to this receiver. Device Server
The GUI Server logs configured to be sent to this receiver. GUI Server
The HA Server logs configured to be sent to this receiver. HA Server
Adding and Configuring Syslog Receivers
To add and configure a syslog receiver, follow these steps:
1.
Select System Administration > Syslog Forwarding .
2.
In the Data Sources section, select the syslog facility for each GUI Server log, Device
Server log, and HA Server log. The syslog facility is a field included in the syslog
message to help identify the data source.
3.
Click Save .
4.
Click Add new Receiver .
The syslog receiver configuration window appears as shown in Figure 37 on page 55.
Copyright © 2010, Juniper Networks, Inc. 54
NSMXpress and NSM3000 User Guide