Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 78 / 100

Figure 39: Create NSMXpress User Dialog Box
3.
Enter the user name in the Username text box.
4.
Select Unix authentication from the Password drop-down list. The Password and
Confirm Password text boxes are then disabled since the password is fetched from
the local OS.
5.
From the
User Profile
drop-down list box, select the user profile you want to associate
with the local user in the WebUI.
6.
Click Submit . The NSMXpress Users dialog box appears with the new NSM appliance
user listed.
To create a WebUI user:
1.
Select System Administration > User Management . The NSMXpress Users dialog box
appears listing all the NSM appliance users. See Figure 40 on page 58.
2.
Click Create a new NSMXpress User . The Create NSMXpress user dialog box appears.
3.
Enter a user name in the
Username
text box.
4.
Select
Set to
from the password drop-down list and enter the password you want to
set in the password text box.
5.
Reenter the password in the
Confirm Password
text box.
6.
Select the user profile you want to associate with this user from the
User Profile
drop-down list box.
7.
Click Submit . The NSMXpress Users dialog box appears with the new NSM appliance
user listed.
Deleting a User
To delete a user:
1.
Select System Administration > User Management . The NSMXpress Users dialog box
appears listing all NSM appliance users.
2.
Select the check box next to the name of the user you want to delete and click Delete
Selected . Click Delete User in the Delete Users confirmation dialog box that appears.
NOTE: You cannot delete admin users or change their user profiles.
Copyright © 2010, Juniper Networks, Inc. 58
NSMXpress and NSM3000 User Guide