Juniper NETWORK AND SECURITY MANAGER NSM3000 - REV 1, Manual

Page: 72 / 100

•
Description—A brief description of the appliance.
4.
Click Save .
SNMP Trap Configuration
To configure SNMP trap conditions:
1.
Select System Administration > SNMP Monitoring .
2.
Select the SNMP Traps tab, which is shown in Figure 36 on page 52.
Figure 36: Configuring SNMP Traps
3.
In the Manager IP field, enter the IP address of the SNMP management server.
4.
Select from the following trap conditions:
• Disk space low
Enter the percentage of free disk space below which SNMP issues a trap.
•
Memory low
Enter the percentage of free memory below which SNMP issues a trap.
•
CPU high
Enter the percentage of CPU use over which SNMP issues a trap.
•
NSM start/stop
•
Admin Logon/Logoff
• External IP unreachable
Enter the IP address of the required device.
5.
Click Save .
Copyright © 2010, Juniper Networks, Inc. 52
NSMXpress and NSM3000 User Guide