F 3
0708
.GB
3
Servicing and inspection
Thorough and expert servicing is one of the most important requirements for the safe
operation of the industrial truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The application conditions of an industrial truck considerably affect the wear levels of
the service components.
We recommend an application analysis carried out on site by a Jungheinrich
customer adviser to establish specific maintenance intervals in order to restrict
damage caused by wear.
The service intervals stated are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions of extreme dust, temperature fluctuations or multiple shifts.
The following maintenance checklist states the tasks and intervals after which they
should be carried out. Maintenance intervals are defined as:
W
= Every 50 service hours or at least weekly
A
= Every 500 service hours
B
= Every 1000 service hours, or at least annually
C
= Every 2000 service hours, or at least annually
Z
W service intervals are to be performed by the customer.
F 3
0708
.GB
3
Servicing and inspection
Thorough and expert servicing is one of the most important requirements for the safe
operation of the industrial truck. Failure to perform regular servicing can lead to truck
failure and poses a potential hazard to personnel and equipment.
M
The application conditions of an industrial truck considerably affect the wear levels of
the service components.
We recommend an application analysis carried out on site by a Jungheinrich
customer adviser to establish specific maintenance intervals in order to restrict
damage caused by wear.
The service intervals stated are based on single shift operation under normal
operating conditions. They must be reduced accordingly if the truck is to be used in
conditions of extreme dust, temperature fluctuations or multiple shifts.
The following maintenance checklist states the tasks and intervals after which they
should be carried out. Maintenance intervals are defined as:
W
= Every 50 service hours or at least weekly
A
= Every 500 service hours
B
= Every 1000 service hours, or at least annually
C
= Every 2000 service hours, or at least annually
Z
W service intervals are to be performed by the customer.
Summary of Contents for EKS 308
