E 1
0306
.GB
E Operation
1
Safety Regulations for the Operation of Forklift Trucks
Driver authorisation:
The forklift truck may only be used by suitably trained
personnel, who have demonstrated to the proprietor or his representative that they
can drive and handle loads and have been authorised to operate the truck by the
proprietor or his representative.
Driver’s rights, obligations and responsibilities:
The driver must be informed of
his duties and responsibilities and be instructed in the operation of the truck and shall
be familiar with the operator manual. The driver shall be afforded all due rights.
Unauthorised Use of Truck:
The driver is responsible for the truck during the time
it is in use. The drive must prevent unauthorised persons from driving or operating the
truck. Do not carry passengers or lift other people.
Damage and Faults:
The supervisor must be immediately informed of any damage
or faults to the forklift truck or attachment. Trucks which are unsafe for operation (e.g.
wheel or brake problems) must not be used until they have been rectified.
Repairs:
The driver must not carry out any repairs or alterations to the forklift truck
without the necessary training and authorisation to do so. The driver must never
disable or adjust safety mechanisms or switches.
Hazardous area:
A hazardous area is defined as the area in which a person is at risk
due to truck movement, lifting operations, the load handler (e.g. forks or attachments)
or the load itself. This also includes areas which can be reached by falling loads or
lowering operating equipment.
F
Unauthorised persons must be kept away from the hazardous area. Where there is
danger to personnel, a warning must be sounded with sufficient notice. If
unauthorised personnel are still within the hazardous area the truck shall be brought
to a halt immediately.
Safety Devices and Warning Signs:
Safety devices, warning signs and warning
instructions in the present operating instructions shall be strictly observed.
F
Warnings and notices such as load diagrams, strap points and data plates must at all
times be legible. Replace if necessary.
E 1
0306
.GB
E Operation
1
Safety Regulations for the Operation of Forklift Trucks
Driver authorisation:
The forklift truck may only be used by suitably trained
personnel, who have demonstrated to the proprietor or his representative that they
can drive and handle loads and have been authorised to operate the truck by the
proprietor or his representative.
Driver’s rights, obligations and responsibilities:
The driver must be informed of
his duties and responsibilities and be instructed in the operation of the truck and shall
be familiar with the operator manual. The driver shall be afforded all due rights.
Unauthorised Use of Truck:
The driver is responsible for the truck during the time
it is in use. The drive must prevent unauthorised persons from driving or operating the
truck. Do not carry passengers or lift other people.
Damage and Faults:
The supervisor must be immediately informed of any damage
or faults to the forklift truck or attachment. Trucks which are unsafe for operation (e.g.
wheel or brake problems) must not be used until they have been rectified.
Repairs:
The driver must not carry out any repairs or alterations to the forklift truck
without the necessary training and authorisation to do so. The driver must never
disable or adjust safety mechanisms or switches.
Hazardous area:
A hazardous area is defined as the area in which a person is at risk
due to truck movement, lifting operations, the load handler (e.g. forks or attachments)
or the load itself. This also includes areas which can be reached by falling loads or
lowering operating equipment.
F
Unauthorised persons must be kept away from the hazardous area. Where there is
danger to personnel, a warning must be sounded with sufficient notice. If
unauthorised personnel are still within the hazardous area the truck shall be brought
to a halt immediately.
Safety Devices and Warning Signs:
Safety devices, warning signs and warning
instructions in the present operating instructions shall be strictly observed.
F
Warnings and notices such as load diagrams, strap points and data plates must at all
times be legible. Replace if necessary.
Summary of Contents for EKS 308
