Jungheinrich EKS 308, Operating Instructions Manual

Page: 24 / 99

C 1
0306
.GB
C Transport and Commissioning
1 Transport
Depending on the height of the mast and local conditions, the truck can be
transported in three different ways:
– Vertically, with mast and load handler assembled (for low heights)
– Vertically, with mast and load handler disassembled (for large heights)
– Vertically, with the mast folded.
M
Only personnel trained by the manufacturer may assemble the truck on site,
commission it and instruct the driver.
2 Lifting by crane
M
Only use lifting gear with sufficient capacity (for truck weight see “Truck data plate”,
chapter B).
F
The truck must only be lifted by crane with the battery removed.
– Park the truck securely
(see “Parking the Truck Securely” in Chapter E).
Loading by crane with mast assembled
– With the mast assembled, attach the crane slings to the mast cross member (1) and
to the side of the chassis (2).
M
Attach the crane slings to the strap points (1,2) so that the truck cannot slip.
1
2
C 1
0306
.GB
C Transport and Commissioning
1 Transport
Depending on the height of the mast and local conditions, the truck can be
transported in three different ways:
– Vertically, with mast and load handler assembled (for low heights)
– Vertically, with mast and load handler disassembled (for large heights)
– Vertically, with the mast folded.
M
Only personnel trained by the manufacturer may assemble the truck on site,
commission it and instruct the driver.
2 Lifting by crane
M
Only use lifting gear with sufficient capacity (for truck weight see “Truck data plate”,
chapter B).
F
The truck must only be lifted by crane with the battery removed.
– Park the truck securely
(see “Parking the Truck Securely” in Chapter E).
Loading by crane with mast assembled
– With the mast assembled, attach the crane slings to the mast cross member (1) and
to the side of the chassis (2).
M
Attach the crane slings to the strap points (1,2) so that the truck cannot slip.
1
2