Jungheinrich EKS 308, Operating Instructions Manual

Page: 30 / 99

C 7
0306
.GB
5 Commissioning
M
Only operate the truck with battery current. Rectified AC current will damage the
electronic components. The battery leads (tow cable) must be less than 6m long.
To prepare the truck after delivery or after transport, proceed as follows:
– If necessary install and charge the battery (see chapter D, “Battery removal and
installation” and “Charging the battery”).
– Commission the truck as per instructions (See chapter E, “Starting up the truck”).
F
Before commissioning, check the truck to
ensure the tilt safety device (27) is present.
Z
The tilt safety device (27) must be 12-14 mm
off the ground.
F
Attach the seat belt and secure it to the front
of the overhead guide through the safety
cord as soon as you step on the platform and
before starting other work (see "Attaching the
Seat Belt" in chapter E).
Z
Check that all safety devices are present and
operational.
27
C 7
0306
.GB
5 Commissioning
M
Only operate the truck with battery current. Rectified AC current will damage the
electronic components. The battery leads (tow cable) must be less than 6m long.
To prepare the truck after delivery or after transport, proceed as follows:
– If necessary install and charge the battery (see chapter D, “Battery removal and
installation” and “Charging the battery”).
– Commission the truck as per instructions (See chapter E, “Starting up the truck”).
F
Before commissioning, check the truck to
ensure the tilt safety device (27) is present.
Z
The tilt safety device (27) must be 12-14 mm
off the ground.
F
Attach the seat belt and secure it to the front
of the overhead guide through the safety
cord as soon as you step on the platform and
before starting other work (see "Attaching the
Seat Belt" in chapter E).
Z
Check that all safety devices are present and
operational.
27