E 15
0306
.GB
4.2
Travelling, Steering, Braking
– Press the EMERGENCY
DISCONNECT (5) down.
All truck movement is disabled.
The operation of the switch must not
be affected by any objects placed in
the way.
4.2.1 Travel
The truck can be operated in 3 modes:
Free ranging, wire guidance (WG) or rail guidance (RG).
The applicable mode depends on the guidance system of the racking system being
operated.
M
Do not drive the truck unless the panels are closed and properly locked.
The foot switch (45) must be kept depressed for travel.
Travelling in apron field
– Close the safety gates.
– Turn the EMERGENCY
DISCONNECT (5) to undo it.
– Put the key in the key switch (3) and
turn it anti-clockwise; the “operational”
display lamp will be lit.
– Apply the foot switch (45).
– Carry out a test run, see Seite E7.
– Raise the Main lift with the hydraulic
control knob (2) until the forks are
clear of the ground.
– Slowly turn the travel control knob (1)
with your right thumb.
Turn in drive direction (F)
= Forward travel
Turn in load direction (R)
= Reverse travel
– You can control the travel speed by
continuing to turn or by retracting the
travel control knob.
– Use the steering wheel (10) to steer
the truck in the required direction.
F
R
5
10
3
1
2
F
R
45
E 15
0306
.GB
4.2
Travelling, Steering, Braking
– Press the EMERGENCY
DISCONNECT (5) down.
All truck movement is disabled.
The operation of the switch must not
be affected by any objects placed in
the way.
4.2.1 Travel
The truck can be operated in 3 modes:
Free ranging, wire guidance (WG) or rail guidance (RG).
The applicable mode depends on the guidance system of the racking system being
operated.
M
Do not drive the truck unless the panels are closed and properly locked.
The foot switch (45) must be kept depressed for travel.
Travelling in apron field
– Close the safety gates.
– Turn the EMERGENCY
DISCONNECT (5) to undo it.
– Put the key in the key switch (3) and
turn it anti-clockwise; the “operational”
display lamp will be lit.
– Apply the foot switch (45).
– Carry out a test run, see Seite E7.
– Raise the Main lift with the hydraulic
control knob (2) until the forks are
clear of the ground.
– Slowly turn the travel control knob (1)
with your right thumb.
Turn in drive direction (F)
= Forward travel
Turn in load direction (R)
= Reverse travel
– You can control the travel speed by
continuing to turn or by retracting the
travel control knob.
– Use the steering wheel (10) to steer
the truck in the required direction.
F
R
5
10
3
1
2
F
R
45
Summary of Contents for EKS 308
