Jungheinrich EKS 308, Operating Instructions Manual

Page: 59 / 99

0306
.GB
E 22
4.6 Order picking and stacking
Collecting, transporting and depositing loads
M
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the truck’s capacity. Observe the load chart.
– Check the fork distance for the pallet and adjust if necessary.
o
Adjusting the forks
To lift the load securely, the forks must be as far apart as possible and centrally
positioned with respect to the fork carriage. The load centre of gravity must be
centrally aligned between the forks.
– Raise the forks (52) slightly at the front.
– Push the forks (52) into the correct position on the fork carriage (24)
.
52
0306
.GB
E 22
4.6 Order picking and stacking
Collecting, transporting and depositing loads
M
Before picking up a load unit the driver must make sure that it has been correctly
palletised and does not exceed the truck’s capacity. Observe the load chart.
– Check the fork distance for the pallet and adjust if necessary.
o
Adjusting the forks
To lift the load securely, the forks must be as far apart as possible and centrally
positioned with respect to the fork carriage. The load centre of gravity must be
centrally aligned between the forks.
– Raise the forks (52) slightly at the front.
– Push the forks (52) into the correct position on the fork carriage (24)
.
52