Jungheinrich EJC 212z, Operating Instructions Manual

Page: 80 / 250

Ite
m Control/display Function
15 Key switch
t
– Activates the truck by switching on the
control voltage
– Removing the key prevents the truck from
being switched on by unauthorised
personnel.
Key switch with second
switch stage
o
– Brake release to move the truck when non-
operational.
CanCode o Replaces the key switch
– Activates the truck via a card/transponder
– Travel program selection
– Code setting
– Parameter setting
ISM access module
o
Replaces the key switch
– Activates the truck via a card/transponder
– Displays readiness for operation
– Operational data logging
– Data exchange with card/transponder
Keypad
o
Replaces the key switch
– Provided only as a supplement to the display
unit
– Truck release by entering set-up and access
codes
Transponder reader
o
Replaces the key switch
– Provided only as a supplement to the display
unit
– Activates the truck via a card/transponder
18 Document storage
compartment
t – Used to store the operating instructions
62 Fork lowering button
t
Lowers the forks
– The lowering speed can be infinitely
controlled by the stroke of the switch
(8 mm).
63 Fork lifting button
t
Lifts the forks
– The lift speed can be infinitely controlled via
the stroke of the switch (8 mm).
64 Support arm lowering
button (EJC 212z /
214z / 216z / 220z only)
t
– Lowers the support arms at a constant
speed
65 Warning signal button t – Warning signal button
66 Support arm lifting
button (EJC 212z /
214z / 216z / 220z only)
t
– Raises the support arms at a constant speed
67 Terminal board
t
– Used to hold paper
t
= Standard equipment
o
= Optional equipment
78
04.19 en-GB