3.1
Internal Operation Combined with Brief External or Cold Store
Operation (
t
)
In addition to the permissible application conditions in industrial and commercial
environments, the truck may also be used in outdoor environments, cold stores and
fresh food areas. Secure parking is only permissible indoors or in a cold store
environment.
– Permissible temperature range -10 °C to +40 °C.
– Secure parking is only permissible at +5 °C to +40 °C.
– Maximum air humidity 95% non-condensing.
– The application areas can be changed, but in general this should be minimised
due to thawing and possible corrosion.
– Thawing is permissible only if the truck can be subsequently dried thoroughly.
– Do not charge the battery below +5 °C.
3.2
Internal Operation in Cold Stores with Cold Store Equipment (
o
)
In addition to the permissible operating conditions in industrial and commercial
environments, the truck remains primarily in cold stores. The truck should only leave
the cold store briefly to hand over a load.
– Permissible temperature range -28 °C to +25 °C.
– Maximum air humidity 95% non-condensing.
– Thawing is permissible only if the truck can be subsequently dried thoroughly.
– In cold store areas below -10 °C the truck must be operated permanently and
should not be parked securely for more than 15 minutes.
– Do not charge the battery below +5 °C.
NOTICE
Battery damage
As the temperature becomes increasingly cold, the battery can be damaged if the
battery charge is low.
u
If the battery charge is low do not use the truck in areas of -28 °C to -5 °C.
u
If the battery charge is low it is preferable not to use the truck in areas of -5 °C to
+5 °C.
u
Charge the battery, see page 55.
13
04.19 en-GB
Summary of Contents for EJC 212z
