manualshive.com logo in svg

Jungheinrich EJC 212z, Operating Instructions Manual, Page: 206 / 250

Share
Download
Jungheinrich EJC 212z Operating Instructions Manual Download Page 206

1.2

Customer Service

1.2.1

Maintenance contents

In accordance with the EJC 212z/214z/216z service interval, to be performed every
1000 service hours, but at least once a year.

1.2.1.1

Standard equipment

Brakes

Test the brake with the tiller in the maximum vertical and horizontal positions.
Measure the air gap of the magnetic brake.

Electrical system

Test the contactors and/or relays.
Carry out a chassis insulation-resistance test.

Chassis/structure

Check that the panels and covers as well as mounting brackets are secure. Ensure they
function correctly and are safe.

Hydraulic operations

Test the lift sensors in the mast.
Adjust the slide pieces.
Adjust the load chains.
Lubricate the load chains.
Test emergency lowering.
Correct the hydraulic oil level.
Test the pressure relief valve.

Agreed services

Carry out a test run with the rated load or a customer-specific load.
Demonstration after maintenance.
Lubricate truck according to the lubrication diagram.

Steering

Test the tiller return function.

Battery charger

Test the immobiliser on trucks with on-board chargers.
Carry out a potential measurement on the chassis while charging is in progress.

204

04.19 en-GB

Summary of Contents for EJC 212z



























































































































































































































































Reviews:

No comments