5
Battery removal and installation
WARNING!
Accident risk during battery removal and installation
Due to the battery weight and acid there is a risk of trapping or scalding when the
battery is removed and installed.
u
Note the "Safety regulations for handling acid batteries" section in this chapter.
u
Wear safety shoes when removing and installing the battery.
u
Use only batteries with insulated cells and terminal connectors.
u
Park the truck on a level surface to prevent the battery from sliding out.
u
Make sure the crane slings have sufficient capacity to replace the battery.
u
Use only approved battery replacement devices (battery roller stand, replacement
trolley etc.).
u
Make sure the battery is securely located in the truck's battery compartment.
CAUTION!
Trapping hazard
There is a risk of trapping when you close the battery cover.
u
Make sure there is nothing between the battery cover and the truck when you
close the battery cover.
65
04.19 en-GB
Summary of Contents for EJC 212z
