Jungheinrich EJC 212z Page 161 Operating Instructions Manual Download

Page: 161 / 250

8.11.2

Activating the transponder reader

Procedure

• Release the emergency disconnect

switch, see page 87.

• Enter the default code 1-2-3-4 using the

keys below the display unit (97).

The truck is switched on.

• Press the key below the "Settings"

symbol (100).

• Press the key below the "Change set-

up code" symbol (101).

• Enter the set-up code 2-4-1-2 using the

keys below the display unit (97).

The set-up code entered is displayed.

• Press the key below the "Delete"

symbol (102).

The set-up code is deleted.

• Hold a transponder in front of the

transponder reader (99).

This transponder thus becomes the set-
up transponder.

• Press the key below the "Confirm"

symbol (103).

The code for the set-up transponder is
displayed.

If the wrong transponder has been used,
the procedure can be repeated using the
key below the "Delete" symbol (102).

• To return to the main menu, press the

key below the "Back" symbol (104).

The default code can no longer be used
and must be deleted.

Delete the default code, see page 173.

• Add new transponders, see page 172.

The transponder reader is now active.

101

100

103

102

104

102

159

04.19 en-GB

Summary of Contents for EJC 212z



























































































































































































































































Search results

Summary of Contents for EJC 212z

Reviews:

Related manuals for EJC 212z

Brands by name

Popular brands

Jungheinrich EJC 212z, Operating Instructions Manual

Search results

Summary of Contents for EJC 212z

Reviews:

Related manuals for EJC 212z

Brands by name

Popular brands