Jungheinrich EJC 212z Page 171 Operating Instructions Manual Download

Page: 171 / 250

8.13.6

Displaying the Log-in Process

The use of the last different access codes is displayed during the log-in process. The
last log-in is displayed first.

If multiple access codes are logged as being displayable simultaneously, the display
area can be moved by scrolling forward or back.

Requirements

– The truck is switched on, see

page 160.

Procedure

• Press the key below the "Settings"

symbol (100).

• Press the key below the "Log-in

process" symbol (109).

• Enter the set-up code using the keypad

(98).

The set-up code entered is shown in
the display unit (97) as filled-in circles.

• To scroll forward, press the button

under

the

"Down

selection"

symbol (108) as many times as
necessary.

The display area moves: Additional
earlier log-ins are displayed.

• To scroll back, press the button under

the "Up selection" symbol (110) as
many times as necessary.

The display area moves: More recent
log-ins are displayed.

• To return to the main menu, press the

key below the "Back" symbol (104).

The log-in process is displayed.

100

104

109

108

110

169

04.19 en-GB

Summary of Contents for EJC 212z



























































































































































































































































Search results

Summary of Contents for EJC 212z

Reviews:

Related manuals for EJC 212z

Brands by name

Popular brands

Jungheinrich EJC 212z, Operating Instructions Manual

Search results

Summary of Contents for EJC 212z

Reviews:

Related manuals for EJC 212z

Brands by name

Popular brands