Jungheinrich EJC 212z, Operating Instructions Manual

Page: 110 / 250

4.10 Use as a Lift Work Table
The load handler can remain in a raised position to be used as a lift work table when
the truck is switched off, provided the operator is close to the truck.
Z
Immediate vicinity of the truck is when the operator is able to respond to
malfunctions or attempts to use the truck by unauthorised persons immediately.
Observe national regulations and local operating conditions.
WARNING!
A raised load handler can cause accidents
A stationary truck with a raised load handler is potentially hazardous in work areas.
u
Prevent any risk to personnel and materials.
u
Never load or discharge loads manually with a raised load handler in areas that
are hazardous, with limited visibility or insufficient lighting.
u Park the truck securely when leaving it, see page 84.
WARNING!
Risk of accident when the raised load handler slowly lowers of its own accord
The raised load handler can lower independently due to internal leakage. According
to DIN EN ISO 3691-1 the load handler may lower by up to 100 mm during the first
10 minutes at the rated capacity with the hydraulic oil at normal operating
temperature.
u Never stand underneath a raised load handler.
WARNING!
Risk of injury from falling loads
Falling loads can cause injuries.
u
Never stand underneath a raised load handler.
u Never manually load or unload loads that could fall on the operator without
additional safety devices at heights greater than 1800 mm.
u Always load loads so that they cannot fall off or accidentally shift.
u Secure low or small-item loads e.g. by wrapping them in film.
u
Do not manually load or unload loads that are not correctly packed or have shifted
as well as loads with damaged pallets or damaged stacking containers.
Use as a lift work table
Requirements
– Storage spare suitable for manual loading or discharging of loads.
Procedure
• Drive the truck carefully up to the storage location.
• Press the “Raise load handler ” button (63) until you reach the desired lift height.
• Switch off the truck.
Loads can be loaded or discharged manually with the load handler raised.
108
04.19 en-GB