D*AP4 VAP
63
Setup GUI – AUDIO PROCESSOR –
Monitor
As seen on the
AUDIO PROCESSOR > Overview
page the
D*AP4 VAP
provides two monitor facilities
which may be connected to the function blocks of the audio processor (DSP).
For the example below (see SYSTEM > Setup) the VAP is in
Voice Channel Mode = "Stereo"
.
The first monitor is connected to the
Input
section of the voice channels in
Stereo
[V1/V2 Stereo]
while the second monitor is connected to the
Leveler
output of the
Program
path in
L+R Mono
[Program L+R Mono]
(see AUDIO PROCESSOR > Overview):
The settings must be done on the Monitor pane:
Source
Section / Channel
[V1/V2 Stereo / V1+V2 Mono / Program Stereo / Program L/L Mono
Program R/R Mono / Program L+R Mono]
Processing Block
Select here which processing
block should be monitored
Monitor Output
Mute
[ON / OFF]
Attenuation (dB)
[-80.0 … 0.0]
Delay Coarse (ms)
[0 … 2000]
Delay Fine
[0 … 2000]
(samples)
