D*AP4 VAP
11
Operating – menu structure of the
X*AP RM
1
remote panel –
operating displays
When pressing the
<MENU>
button, the
upper operating display
opens up:
When pressing the
<ESC>
button you will return to the
main operating display
.
Operating display –
Analog Mic Interface
Here you can setup both mic preamps.
Operating display –
ON AIR profiles
This is the same menu that you will reach if the feature set "Load Profiles" is selected
(see previous page). Here you may remote control the
cough cut
for the respective voice channel and
load a pre-defined profile. A
profile
is a set of audio relevant presets that must be set-up in the:
EVENTS > Events > Preset Events
section. Pressing the
<Load Profile>
hotkey will highlight the area
above the button (see above – the default display is a dash). You can now select a profile by turning the
Rotary Encoder
. After the selection you must press the
Rotary Encoder
or the
<Load Profiles>
hotkey.
Operating display –
Loudness Meter
The meter style (ITU BS.1770-x / ATSC / EBU etc.) is defined by the settings of:
AUDIO PROCESOR > Level Magic > Loudness Mode (example is for EBU R12()
.
The above menu serves as a display of measurement values and offers the metering control buttons
(reset & pause / continue).
MENU
ESC
EBU R128
Integrated LRA Time
[LUFS] [LU] hh:mm:ss
Input
-19.3 6.4
Output
-23.2
5.8
00:12:15
Short-Term TPL Max Momentary
[dBTP] Max
-19.7
-6.6
-12.0
-21.3
-5.0
-16.0
reset max
pause
reset
MENU
ESC
Voiceproc 3
10.110.88.135
Gain Enable
on
Gain [dB]
10
Pad [dB]
OFF
Gain Enable
off
Gain [dB]
10
Pad [dB]
OFF
M1 Preamp
M2 Preamp
Phantom
Power
off
Phantom
Power
off
MENU
ESC
Voiceproc 3
10.110.88.135
Analog Mic
Interface
ON AIR
Profiles
ITU BS 1770-3
Meter
Audio Processor Monitor Monitor
Voice Program 1/2 3/4
MENU
ESC
Voiceproc 3
10.110.88.135
Cough Cut
Mic Active
Voice 1
ON AIR
Load Profile
Radio Voice
Voice Over
OFF
