D*AP4 VAP
13
When you press
hotkey #2
you are able to unlink both channels. Now you must simply push the rotary
encoder (or turn it counter clockwise / clockwise) to toggle between
Linked
and
Unlinked
condition.
In case of
Unlinked
, the display shows two independent parameter sets.
By pressing
hotkey # 1
you can toggle the voice channel that is under control:
The examples above demonstrates the general way how to setup parameters of the
AUDIO PROCESSOR
of the
D*AP4 VAP
:
* Select a parameter
* Change it by using of the
Rotary Encoder
.
- Push it to toggle states
- Turn it to increment / decrement values.
Important Note!
Not all processing blocks can be linked / unlinked. Carefully compare the settings via the
web GUI if you are not certain about individual settings. In general the
X*AP RM
1
menus are a duplication of
the GUI settings. To access all parameters of a function block you must sometimes use the
<Shift>
button.
E.g. the equalizer has 5 pages for one voice channel!
Operating – menu structure of the
X*AP RM
1
remote panel –
menu tree
Power up
display
<MENU>
opens
X*AP RM
1
remote panel IP setup menu. See
X*AP RM
1
manual for details.
<Address> setup
<Netmask> setup
<Gateway> setup
<empty>
Device 1
setup IP & ON / OFF
Device 2
setup IP & ON / OFF
Device 3
setup IP & ON / OFF
Device 4
setup IP & ON / OFF
<ESC>
back to
power up
display
<connect>
will connect with that particular
D*AP4 VAP
and opens the
main operating
display:
Hotkey #
1 <Clear>
2 <Just De-Ess>
3 <Gentle>
4 <Radio>
5 <Normalize>
6 <Heavy>
7 <empty>
8 <Panic>
<ESC>
will jump back to
power up
display
<MENU>
opens the
upper operating
displays:
Hotkey #
1 <Analog Mic Interface>
2 <ON AIR Profiles>
3 <not active>
4 <Loudness Meters>
5 <Voice>
6 <Program>
7 <Monitor 1/2>
8 <Monitor 3/4>
<ESC>
back to
main operating
display
MENU
ESC
Voice: Input Link On Mute
Gain[dB] Polarity 1/2
1 Unlinked On off
0.0 Normal
V2 Unlinked On off
0.0 Normal
2
Unlinked
