D*AP4 VAP
61
Setup GUI – AUDIO PROCESSOR –
Level Magic
This function block is used for loudness control of the program path. It can be used to control an
independent program signal or a program signal including voice over (see Overview diagram).
Loudness Mode
[Level / ITU BS.1770-1 / -2 / -3
EBU R128 / ARIB TR-832 /
ATSC A/85 (2011) /
ATSC A/85 (2013) /
Free TV OP-59 / Portaria 354)
Link
[Linked, Unlinked]
The program path may be
unlinked for dual mono
operation.
Leveler
[ON / OFF]
Processing Profile
[Live / Speech / Pop / Uni /
Classic]
Loudness Target (LUFS)
[-50 … 0]
Time (s/m/h)
[10, 20, 40 / 1, 2, 5, 10, 20 40 /
1, 2]
Max. Gain (dB)
[0 … 10 … 40]
Freeze Level (dBFS)
[-60 … -50 … -20]
Transient Processor
Max. Gain (dB)
[0 … 10 … 15]
Response
[Soft / Mid / Hard]
Expert
[ON / OFF]
Clear Processing History
<clear>
Initial Dynamic Gain (dB)
[-40 … 0 … 15]
AGC Recovery
[Normal / Fast]
Low Level Behavior
Processing Threshold (dBFS)
[-80 … -70 … -20]
Below Threshold Mode
[Release / Hold]
For details regarding LevelMagic parameters see the bulletin: "Junger_LevelMagic-Leveler-
Dynamics_Parameters_161128.pdf" on the Junger web site
http://junger-audio.com/downloads.
