D*AP4 VAP
18
Transmit Metering Data
[OFF / ON]
Metering data will be streamed via UDP protocol. In order to receive such
data by external applications you must enable it.
Service Options
Maintenance Interface
[OFF / ON]]
via RPC
For administrative use to enable communication with factory tools
.
Telnet Server
[ON / OFF]
Enables a telnet server to connect the consol interface via IP (port 21).
Diagnostics
<get diagnostics file>
Pressing this soft button will start the assembly of a diagnostics file.
The file will be presented in XML format for download.
If you experience unexpected behavior of the device you may be asked by
the Junger support team to send such file by e-mail for analysis.
Setup GUI – SYSTEM –
Setup
Voice Channel Mode
[2 x Mono / Stereo]
Set according to the type of voice signal. This will automatically
configure all relevant audio processing blocks.
Important Note!
If set to "Stereo" all relevant settings will provide an
unlink
function in case you need to
setup both channels differently for any reason. I.e. the layout of several panes and the
X*AP RM
1
will differ
depending on this setting. If put into "Stereo" mode the label for Voice 1 (see below) will be used.
Section / Channel Labels
Each of the individual voice channels as well as the program path
Voice 1
has a name that will be used as a reference for the display of
Voice 2
parameters and their setup. You may use names of your choice.
Program
Default names are Voice 1 / Voice 2 and Program.
