D*AP4 VAP
51
Spectral Signature Hold
<Normal> / <Hold>
Hold freezes the dynamic adaption and preserves the current frequency
response curve, for as long as the function is activated. This can be
useful for example to prevent adaption to an inserted audio signal
(intermission, advertising…).
Expert
[ON / OFF]
All parameters within the Expert section are duplicated in the Signature
and Spectrum graphs. They can be used to enter numerical values
directly. Changes are reflected in the graphs and likewise in reverse.
Link Max Gain Settings
[ON / OFF]
Link Threshold Settings
[ON / OFF]
Band 1
[ON / OFF]
Normalized
[-40.0 … 0 … 40.0]
Signature level
Max Gain
[0.0 … 12.0
Absolute Gate
[-84.0 … 0.0]
Threshold
Band 2 … 16
similar parameters as Band 1
Setup GUI – AUDIO PROCESSOR – Filter
– Equalizer
The graphical EQ offers 5 bands. The characteristic of each band can be setup either left hand side of
the graph or alternatively for each band further below.
Program / Section
["Voice 1" / "Voice 2" / Preset] or ["Voice 1" / Preset]
Selects the source for which the curve will be displayed.
This selection depends on the Voice Channel Mode
(see SYSTEM > Setup) and whether or not the channels are linked for
stereo operation.
Channel
Applicable only if SYSTEM > Setup > Voice Channel Mode = Stereo
to select which channel must actually be displayed.
Enable
[ON / OFF]
Same function as
<Equalizer>
further below
Band 1 … 5
filter characteristic will be
selected by this pop up:
