D*AP4 VAP
12
Operating display –
Audio Processor > Voice
This menu gives access to tweak the voice channel(s). The active
<Shift>
button indicates that there
is another page (2/2):
The example below explains how to set parameters via the
X*AP
. E.g. if you press
<Input>
all
p
arameters for the
Input
function block will be accessible (here we assume
Stereo
mode):
Here you are at the input section of the voice channel. The
<Shift>
button
again toggles between two pages and gains access to the remaining parameters.
Here is the example for
page 2/2
after pressing the
<Shift>
button:
If the voice channels operate in stereo mode:
SYSTEM > Setup > Voice Channel Mode = Stereo
,
you are able to
link / unlink
the respective processing blocks (see AUDIO PROCESSOR > Input):
The above example shows both voice channels in
Linked
mode.
MENU
ESC
Audio Processor
Voiceproc 3
10.110.88.135
1/2
Input
M/S
Matrix
Phase
Rotator
Equalizer
Voice
Spectral
Signature
Dynamics
Leveler
De-Esser
MENU
ESC
Audio Processor
Voiceproc 3
10.110.88.135
2/2
Voice
Ouput
MENU
ESC
Voice: Input Link On Mute
Gain[dB] Polarity 1/2
V2 Linked On off
0.0 Normal
1/2
MENU
ESC
Voice: Input Delay Coarse [ms] Fine [samples]
HPF [Hz] LPF [kHz] 2/2
1/2 0 0
OFF OFF
1/2
MENU
ESC
Voice: Input Link On Mute
Gain[dB] Polarity 1/2
V2 Unlinked On off
0.0 Normal
1/2
Linked
