D*AP4 VAP
68
The
D*AP4 VAP
has two different
action types
:
Event Actions
executes the predefined events
Bypass Actions
executes pre-defined bypass scenarios, independent on
the bypass events
An action runs like a flip-book inside the
D*AP4 VAP
. This powerful technology spans from simply
recalling a certain parameter over narrator specific parameter combinations (household name: "Preset")
to the complete reconfiguration of the
D*AP4 VAP
including all signal routing, processing parameters
and so forth. It also allows you to create your own
snap shots
where you decide what is part of it and
what is not! But it also enables several
fail over
scenarios where the
D*AP4 VAP
will automatically
react to the system and/or parameter status.
The steps to set up the
EVENTS
system are as follows:
1.
Define
- trigger sources
2.
Configure
- triggers by logical combination of pre defined trigger sources
3.
Set up events
- by selecting presets for function blocks
4.
Create actions
- what will happen - which trigger will launch which event? Or what will happen
in case of some one presses the
<BYPASS>
button at the
X*AP RM
1
or is
engaging the
<Force Trigger Active>
check box or ignite an action from the
mobile UI
.
Setup GUI – EVENTS – Triggers – Sources
–
Remote Hotkeys
Hotkeys are the 8 buttons of an
X*AP RM
1
remote panel. You may give them names and enable them
to become active on the
X*AP RM
1
remote panels main operating menu:
<add trigger>
You can add lines here.
#
The number of the Hotkey on the
X*AP RM
1
remote panel, counting
from left to right.
Label
Each Hotkey may have a label that
appears in the display of the
X*AP RM
1
remote panel above that
button.
Enable
[ON / OFF]
If you turn it off the respective
Hotkey on the
X*AP RM
1
remote
panel becomes inactive - no label is
displayed and the button
background light turns off.
<remove>
will remove a line from the list. This
will automatically disable the
respective front panel button.
The number of hotkey triggers is not limited. You may also add virtual hotkeys which can be used by a
graphical UI for example that may have more than 8 compared to the
X*AP RM
1
.
