D*AP4 VAP
47
Each microphone channel has an independent
Phase Rotator.
Here the display for stereo operation but unlinked
Link
[Unlinked / Linked]
For stereo operation you may
link the setup parameters of
both voice channels.
Phase Rotator
[ON / OFF]
Mode
[OFF / ON / AUTO]
OFF
System is inactive
ON
System always applies phase
wrapping
AUTO
Unbalanced waveforms are
automatically detected and
phase wrapping is applied only
if necessary.
Setup GUI – AUDIO PROCESSOR –
De-Esser
Link
[Unlinked, Linked]
For stereo operation you may link the
setup parameters for both voice
channels.
De-Esser
[ON / OFF]
Frequency (Hz)
[1000 … 3000 … 16000]
Range (dB)
[-20.0 … 0.0]
Filter Type
[Peak / High Shelf]
Q
[0.4 … 1.0 … 8.0]
Important Note!
For the following explanations we assume that the
D*AP4 VAP
is set up for
2 x Mono operation mode (see SYSTEM > Setup > Voice Channel Mode). I.e. there are always two voice
channels displayed and no link option.
