The load capacity bar graph displays the amount of load connected to
the UPS in Battery or AC mode as 20%, 40%, 60%, 80% or 100%
When the amount of load attached to the UPS exceeds 110% of its power
rating; the Overload and Fault icons will flash Off and On, the Overload
error code will be displayed and the UPS will sound a constant alarm to
indicate that there is an Overload condition.
The battery capacity bar graph displays the amount of battery capacity
available as 20%, 40%, 60%, 80% or 100%.
When the UPS is off, press and then release the On/Off/Test button
during the audible alarm's first beep to turn the UPS on.
When the UPS is on, press and then release the On/Off/Test button
during the audible alarm's first beep to turn the UPS off.
When the UPS is in the AC mode, press and hold the On/Off/Test but-
ton until the audible alarm sounds four beeps, then release. The UPS
will perform a 10-second Self-Test.
When the unit is operating in Battery mode, pressing the Alarm Silencer
button will silence the audible alarm. Once the UPS reaches the LBW
(Low Battery Warning) threshold the audible alarm will be re-activated.
The audible alarm cannot be silenced during the LBW alarm. Once the
UPS transfers to the AC mode the audible alarm will be reset to default.
The Scroll button allows the user to scroll through the UPS parame-
ters on the LCD display.
Parameters:
Input Voltage and Frequency
Output Voltage and Fre-
quency
Connected load KVA and KW
Estimated Runtime (minutes) - AC mode and Battery mode
NOTE:
The LCD backlight will illuminate for 20-seconds when the UPS
switches to the Battery mode and then turn off. When the UPS has an
event and/or an error code the LCD backlight will turn on and remain on
to alert the user that an event has occurred.
