CONNECTING THE BATTERIES
(
QUALIFIED SERVICE PERSONNEL ONLY)
Please read all of the WARNINGS and CAUTIONS before attempting to
connect the batteries.
CAUTION! DO NOT USE THE MOUNTING BRACKETS TO LIFT
THE UPS. The mounting brackets are ONLY for securing the UPS
to the rack.
ATTENTION! N'UTILISEZ JAMAIS LES SUPPORTS DE MONTAGE
POUR SOULEVER L'ONDULEUR. Ces supports sont uniquement
conçus pour fixer l'onduleur au rack.
1. Use two or more people when installing the extremely heavy UPS.
2. Remove the UPS from the shipping box and place on a flat surface.
NOTE: No tools are required for removing or installing the battery door.
3. Grasp the battery door on the left hand side, pull it outward and then set it
aside. (Figure 1)
Verify proper polarity. Connect the battery connectors together. (Figure 2)
NOTE: Some sparking may occur this is normal.
4. Re-install the battery door on the UPS.
Connecting the Batteries is complete.
Figure 1
Figure 2
