WALLMOUNT CONFIGURATION
(Available Option)
Use caution when installing the UPS. It is extremely heavy. If the UPS is not
installed in the proper upright position the batteries will be damaged. In
proper position, when looking at the front panel the YELLOW Battery Dis-
connected label on the top cover of the UPS MUST be on your left hand
side
The wall mount kit includes two wall mounting brackets, ten retaining screws,
and the wall mount template. The UPS's side panels have mounting bracket
screw holes for attaching the wall mounting brackets.
1. Once the location of the UPS has been determined, place the UPS on a flat
surface and remove the rack mount brackets from the UPS.
2. The LCD panel can be rotated to read in the upright position. There is a small
slot on each side of the LCD panel. Insert a small flat head screwdriver into one
of the small slots and gently pry the LCD outward. Position the LCD panel so that
it reads in the upright position. Gently press LCD panel back into the front panel.
3. Align the wall mounting brackets with the wall mounting bracket screw holes
on the side panels of the UPS and attach with the six retaining screws.
4. Use the template to mark the screw hole position on the wall.
5. Attach the four retaining screws to the wall making sure they are screwed into
stable structural material. Then clean the area of any loose material. Do not
tighten the retaining screws all the way, leave approximately
3/8" of the retaining screws sticking out.
6. Position the UPS, so that the mounting
bracket keyed holes line up with the four
retaining screws. Slide the UPS down until
its resting securely on the four retaining
screws.
7. Tighten the four retaining screws to
secure the UPS to the wall.
