USB COMMUNICATIONS PORT CONNECTION
(OPTIONAL)
The power monitoring software and interface cable can be used with the UPS.
Use only the interface cable that comes with the UPS. The USB communi-
cations protocol is HID. The HID USB driver comes standard in the Windows
OS. Simply connect the USB cable to the USB communications port on the
rear panel of the UPS. Connect the other end of the USB cable to the device
that will be monitoring/controlling the UPS and then follow the prompts on the
screen. NOTE: When using the UPS's USB port with Windows XP, 7, 8 or 10
the Power Options in the Control Panel may need to be configured. Connect-
ing to the Communications Port is optional. The UPS works properly without
this connection.
POWER MONITORING SOFTWARE
The SRA Series is compatible with free SentryHD Power Monitoring Software
from Para Systems - Minuteman. Please go to
www.minutemanups.com/Support/Downloads/Software Download Center.
RJ11 EPO (Emergency Power Off) PORT (OPTIONAL)
This connection is not for telecommnication use.
Connect one end of the RJ11 cable to the EPO port and the other end of the
RJ11 cable to the EPO switch. In the AC or the Battery mode short pin4 to pin5
for approximately 0.5-seconds to shutdown the UPS. The UPS must be turned
on to resume power output.
NETWORK/PHONE/FAX/MODEM PROTECTION CONNECTION
(OPTIONAL)
Connect a 10/100/1000 Base-T network, single line phone, fax or modem line to
the RJ11/45 modular connectors on the rear panel of the UPS. This connection
will require another length of telephone or network cable. The cable coming
from the telephone service or networked system is connected to the port
marked “IN”. The equipment to be protected is connected to the port marked
"OUT".
COAX PROTECTION CONNECTION (OPTIONAL)
Connect a cable modem , CATV converter, DSS receiver or DVR to the coax
connectors on the rear panel of the UPS. This connection will require another
coax cable. The cable coming from the coax service is connected to the port
marked “IN”. The equipment to be protected is connected to the port marked
"OUT".
OPTION SLOT
The option slot on the rear panel of the UPS is for option cards. Contact Juice
Goose for information about optional components for this UPS series.
