10.
Grasp the battery pull tab
and gently pull the battery module out of the
UPS and set aside. (FIG. 3)
NOTE:
DO NOT use the battery wires to pull
the battery module out. Use
Caution, the battery module is heavy
.
11. Slide the new battery module into the UPS.
12.Re-install the battery retaining bracket.
13.Re-install the four retaining screws for the battery retaining bracket.
14.Verify proper polarity. Reconnect the battery connectors together.
NOTE: Some sparking might occur, this is normal.
15.Re-install the battery door on the UPS.
16.Properly dispose of the old batteries at an appropriate recycling facility or
return them to the supplier in the packing material for the new batteries.
17.The UPS is now ready for the normal operation.
NOTE: If the UPS has a Weak/Bad Battery Alarm after replacing the battery
module, the user must initiate a self-test to clear the Weak/Bad Battery Alarm.
To initiate a self-test see section 4 "TEST BUTTON".
FIGURE 3
