RACKMOUNT CONFIGURATION
Use two or more people when installing the UPS, the UPS is extremely heavy.
Do not move the rack after the units have been installed. The rack may be-
come unstable due to the weight distribution.
This UPS series comes with mounting brackets for the standard 19" (46.5cm)
rack pre-installed on the UPS. Rail Kits for 4-post racks and cabinets are also
available. The screws for mounting the UPS to the rack are included. NOTE:
The mounting brackets can be mounted in the middle of the UPS.
CAUTION! DO NOT USE THE MOUNTING BRACKETS TO LIFT THE UPS.
The mounting brackets are ONLY for securing the UPS to the rack.
ATTENTION! N'UTILISEZ JAMAIS LES SUPPORTS DE MONTAGE POUR
SOULEVER L'ONDULEUR. Ces supports sont uniquement conçus pour fixer
l'onduleur au rack.
Mount the UPS into the rack and secure with the four retaining screws pro-
vided.
TOWER CONFIGURATION
Tower brackets are provided with the UPS. Use cau-
tion. The UPS is extremely heavy.
NOTE: Be sure to place the UPS in the tower
brackets so the YELLOW Battery Disconnected
label on the top cover is on your left hand side. If
the UPS is not installed in the proper upright
position the batteries will be damaged.
1. Once the location of the UPS has been deter-
mined, place the UPS on a flat surface, remove the
rack mount brackets from the UPS and then place
the tower brackets in the desired location.
2. The LCD panel can be rotated to read in the up-
right position. There is a small slot on each side of
the LCD panel. Insert a small flat head screwdriver
into one of the small slots and gently pry the LCD
outward. Position the LCD panel so that it reads in
the upright position. Gently press LCD panel back
into the front panel.
4. Slide the UPS into the tower brackets. Make sure
that the UPS is stable and in the correct position.
