manualshive.com logo in svg

Johnson Controls LSWU025, Manual

Share
Download
Johnson Controls LSWU025 Manual Download Page 3

JOHNSON CONTROLS

3

CHANGEABILITY OF THIS DOCUMENT

FORM 145.05-NOM7 

ISSUE DATE: 10/31/2019

MANUAL DESCRIPTION

FORM NUMBER

Split Shipment Re-assembly

145.05-FA1

Unit Wiring

145.05-W1

Unit Replacement Parts 070-105 Tons

145.05-RP1

Unit Replacement Parts 025-040 Tons

145.05-RP3

Unit Replacement Parts 050-060 Tons

145.05-RP4

Airside Economizer Field Assembly

145.05-FA2

Contractor Start-Up Checklist

145.05-CL1

Johnson Controls Technician Start-Up Checklist

145.05-CL2

Expanded Johnson Controls Technician Start-Up Checklist

145.05-CL3

Troubleshooting Guide

145.05-M1

Start-Up Guide

145.05-SU7

Special Compressor Isolation Shipping Bracket Removal

145.05-FA3

Shipping Damage Claims Service Policy

50.15-NM

CHANGEABILITY OF THIS DOCUMENT

In complying with Johnson Controls’ policy for con-

tinuous product improvement, the information con-

tained in this document is subject to change without 

notice. Johnson Controls makes no commitment to 

update or provide current information automatically 

to the manual or product owner. Updated manuals, if 

applicable, can be obtained by contacting the nearest 

Johnson Controls Service office or accessing the John-

son Controls QuickLIT website at 

http://cgproducts.

johnsoncontrols.com

.

It is the responsibility of rigging, lifting, and operating/

service personnel to verify the applicability of these 

documents to the equipment. If there is any question 

regarding the applicability of these documents, rig-

ging, lifting, and operating/service personnel should 

verify whether the equipment has been modified and 

if current literature is available from the owner of the 

equipment prior to performing any work on the equip-

ment.

CHANGE BARS

Revisions made to this document are indicated with a 

line along the left or right hand column in the area the 

revision was made. These revisions are to technical in-

formation and any other changes in spelling, grammar 

or formatting are not included.

ASSOCIATED LITERATURE

Summary of Contents for LSWU025



















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands